There’s lots to be said for this kit if you want the ultimate lift for your 1500. This ReadyLift 4″ Lift Kit features CNC-machined brackets that will never bend, break, or cause any driveline problems when using 4WD mode. Accompanying the patent pending differential drop brackets is a thick powder coated plate steel skid plate that utilizes the factory attachment locations for ease of installation while providing tough differential protection on rough terrain.
Part Number: 69-3285
Features
Press in 10.9 grade Hardware
3″ OEM Style Cast Blocks will not deform or change shape
No Cutting of OEM Parts or Welding
Maintains Factory Ride
TCT free floating pivot bushings
4.0″ powder coated steel strut extensions
No modifications are to be made to the strut to install the extension
100% DOM tubular Upper Control Arm
OEM-style ball joints pre-pressed into a strong crown that retains OEM geometry
6061-T6 billet Aluminum differential drop brackets
Tire Fitment:
33″ Maximum tire diameter
33×11.50 for no rub on a 9″ wide wheel with +6 offset
18″ – 295/65R18
20″ – 285/60R20
22″ – 285/50R22
Notes
Compatible with cast steel upper control arm ONLY
Not designed for off-road use
Does Not Work With AWD Denali Trucks
Some 2016 models are built with a Hydroformed (Stamped) UCA and LCA that is not compatible
Single Cab configuration has not been validated for fitment & drivability by ReadyLIFT
Will not work for models with stamped steel or aluminum Control Arms
This kit is designed to be used with aftermarket wheels
Designed for use with Aftermarket Wheels with a backspacing of 5.25″. If you intend to run the stock wheels with an aftermarket larger tire, a wheel spacer is required to prevent the tire from touching the control arm at a full locked turn.
ReadyLIFT Suspension Inc. and/or Dirty Garage are NOT responsible for any damage or failure resulting from improper installation.
