Ikon Fork Springs | Honda CB550 (K0-K2) / CB500T

Description

Ikon Fork Springs | Honda CB550 (K0-K2) / CB500T

Common Motor exclusive, Ikon inner front fork springs for your vintage Honda CB550 (K0-K2) & CB500T twin motorcycle.

Why You Need This

Upgrading your rear shocks while leaving the front forks untouched is only half the job. If you’re planning a fork rebuild on your Honda CB550 (K0-K2) / CB500T, now’s the perfect time to step up your front suspension.

These high-performance fork springs from Ikon Suspension were developed in collaboration with Ikon in Australia specifically for the CB550 (K0–K2) and CB500T series of bikes. Exclusively available through Common Motor, these progressive wound fork springs deliver the same proven quality and performance riders have trusted from Ikon (formerly Koni) for decades – all while fitting seamlessly into your stock 35mm fork tubes.

Specifications

Installation

Difficulty: Beginner

1. Loosen the handlebar riser bolts to move them out of the way temporarily.
2. Remove the left fork top cap and pull out the left fork spring.
3. Insert your new Ikon fork spring with the tighter progressive windings facing the top of the fork. Reinstall the top cap.
4. Repeat the same steps with the right fork.

For the best install, we recommend changing your fork oil and rebuilding your forks at the same time.